PIGMENT RED 214 – Introduction and Application C.I. Pigment Red 214 Structure No. 200660. Molecular formula: COH22CI6N6O4. CAS number: [4068-31-3]   Color characterization Pigment Red 214 is bluish red pigment and the shade is brighter than Pigment Red 144. The tinting strength of this pigment is high. and the required concentration of pigment is only 0.56% when blending with 5% of titanium dioxide to achieve/3 SD in PVC, the required concentration of pigment is only 0.13% when blending with 1% of titanium dioxide to achieve 1/3 SD in HDPE.   Main properties  See Table 4. 134 ~ Table 4.136 and Figure 4.40. Table 4.134 Application properties of Pigment Red 214 in PVC Project Pigment TiO2 Light fastness Weather resistance Migration PVC Full Shade 0.1% – 7-8 3-4 Tint Shade 0.1% 0.5% 7-8 5   Table 4.135 Application properties of Pigment Red 214 in HDPE Project Pigment TiO2 Light fastness Weather resistance (3000h, 0.2%) HDPE Full Shade 0.16% – 8 3 1/3 SD 0.16% 1.0% 7-8 Table 4.136 Application of Pigment Red 214 General Plastics Engineering plastics Fiber and Textile LL/LDPE ● PS/SAN ● PP ● HDPE ● ABS ● PET ○ PP ● PC ● PA6 X PVC(soft) ● PBT ● PAN ● PVC(rigid) ● PA X Rubber ● POM ● ●-Recommended to use,   ○-Conditional use,   X-No recommended to use.    Pigment concentration % Figure 4.40 Heat resistance of Pigment Red 214 in HDPE (full shade)   Varieties characteristics The heat and light fastness of Pigment Red 214 is excellent in the coloring of polyolefin. Not only can it be used for the coloring of general-purpose polyolefin, but also can be applied to the coloring of styrenic engineering plastics. However, there is a large effect on the warpage of HDPE. In addition, it is suitable for coloring PP and

  SOLVENT YELLOW 114 – Introduction and Application     C.I. Solvent Yellow 114 (Disperse Yellow 54) C.I.: 47020. Formula: C18H11NO3. CAS No.: 75216-45-4   Solvent Yellow 114 is a greenish yellow solvent dye, melting point 264℃. Solvent Yellow 114 has good heat resistance and light resistance, good migration resistance and high tinting strength with wide application. It is used for coloring for plastics, PS PET ABS PC (polyolefin, polyester, polycabonate) plastics, fiber and printing ink. Its equivalence are Solvaperm Yellow 2G, Yellow GS, Yellow G. Solvent Yellow 114 is also known as Disperse Yellow 54 for inks, including inkjet ink. You can check TDS of solvent Yellow 114 below.   Main properties Shown in Table 5.59. Table 5.59  Main properties of C.I Solvent Yellow 114 Project PS ABS PC Tinting strength (1/3 SD) Dye/% 0.12 0.24 0.065 Titanium dioxide/% 2 4 1 Thermal resistance/℃ Full tone 0.05% 300 280 340 White reduction 1:20 300 280 340 Light fastness degree Full tone 0.05% 8   8 1/3 SD 7~8   7~8   Application range Shown in Table 5.60 Table 5.60  Application range of C.I. Solvent Yellow 114 PS ● SB ● ABS ● SAN ● PMMA ● PC ● PVC-(U) ● PPO ● PET ● POM ◌ PA6/PA66 × PBT ◌ PES fiber ×         ●Recommended to use, ◌ Conditional use, × Not recommended to use.   Variety characteristics Solvent Yellow 114 has high purity and excellent light fastness. Its thermal resistance is up to 300℃ and can be used in the coloring of engineering plastics (limited to polyether plastics). it is also suitable for the coloring of spinning of PET. Bright greenish yellow, high purity, and excellent heat resistance, applicable in coloring of Polyester fiber.   Countertype：2-(3-Hydroxy-2-quinolyl)-1,3-indandione; 2-(3-Hydroxyquinolin-2-yl)-1H-indene-1,3(2H)-dione; 3’-Hydroxyquinophthalone; 3-Hydroxyquinophthalone; C.I. 47020; Disperse Yellow 54; Disperse Yellow

  SOLVENT BLUE 104 – Introduction and Application     C.I. Solvent Blue 104 C.I.: 61568. Formula: C32H30N2O2. CAS No.: 116-75-6 Reddish blue, melting point 240℃, excellent color performance, applicable in pre-coloring of PET, PA6 and PA66 spinning.   Main properties Shown in Table 5.22. Table 5.22  Main properties of C.I Solvent Blue 104 Project PS ABS PC PEPT Tinting strength (1/3 SD) Dye/% Titanium dioxide/% 0.1 0.114 0.096 0.067 1.0 1.0 1.0 1.0 Light fastness degree 1/3 SD white reduction 1/25 SD transparent 6 4 6 5~6 7~8 5 7~8 7 Thermal resistance (1/3 SD) / (℃/5min) 300 300 340 320   Application range Shown in Table 5.23 Table 5.23  Application range of C.I. Solvent Blue 104 PS ● PMMA ● ABS ● PVC-(U) ● PPO ● PC ● PA6/PA66 ● PET ● PBT ● ●Recommended to use   Variety characteristics Solvent Blue 104 has excellent thermal resistance, light fastness, and weather resistance. It is an important variety of solvent dyestuffs and extensively applied to the coloring of engineering plastics such as PET, PC, PA, and so forth. It is also suitable for pre-coloring of spinning of PET, PA6 and PA66.   Countertype：1,4-Bis[(2,4,6-trimethylphenyl)amino]anthracene-9,10-dione;1,4-bis(mesitylamino)anthraquinone;9,10-Anthracenedione, 1,4-bis(2,4,6-trimethylphenyl)amino-;1,4-BIS((2,4,6-TRIMETHYLPHENYL)AMINO)-9,10-ANTHRACENEDIONE;Solvent blue 104 (C.I. 61568);Solvent Blue 104;C.I.61568;Elbaplast Blue R.   Links to Solvent Blue 104 Specification: Plastics and fiber application. Post time: May-24-2021

  SOLVENT VIOLET 13 – Introduction and Application     C.I. Solvent Violet 13 C.I.: 60725. Formula: C21H15NO3. CAS No.: 81-48-1 Bluish violet, melting point 189℃. High tinting strength, excellent fast resistance, high performance-price ratio, applicable in pre-coloring of PET spinning.   Main properties Shown in Table 5.10. Table 5.10  Main properties of C.I Solvent Violet 13 Project PS ABS PC PEPT Tinting strength (1/3 SD) Dye% Titanium dioxide% 0.085 1.0 0.097 1.0 0.085 1.0 0.065 1.0 Light fastness degree 1/3 SD white reduction 1/25 SD transparent 6 7~8 5 6 7~8 8 7~8 8 Thermal resistance (1/3 SD) / (℃/5min) 300 290 310 290   Application range Shown in Table 5.11 Table 5.11  Application range of C.I. Solvent Violet 13 PS ● SB ● ABS ● SAN ● PMMA ● PC ● PVC-(U) ● PPO ● PET ● POM ◌ PA6/PA66 × PBT ● PES fiber × ●Recommended to use, ◌ Conditional use, × Not recommended to use.   Variety characteristics Solvent Violet 13 has high tinting strength, excellent light fastness and thermal resistance, and can basically meet the requirements for long-term exposure. It’s an economic variety with well performance-price ratio, and could be used in the coloring of engineering plastics such as polycarbonate. Solvent Violet 13 is also used for pre-coloring of spinning of PET. Countertype：Ahcoquinone Blue IR Base; 1-Hydroxy-4-p-toluidino-9,10-anthraquinone; 11092 Violet; 1-p-Toluidino-4-hydroxyanthraquinone; 1-Hydroxy-4-(p-tolylamino)-9,10-anthraquinone; 1-Hydroxy-4-(p-toluidino)anthraquinone; Anthraquinone,1-hydroxy-4-p-toluidino- (6CI,7CI,8CI); Alizarin violet 3B;; Disperse Blue 72; C Violet No. 2; D&; D&; D and C Violet No. 2; C.I. Disperse Blue 72; C.I. Solvent Violet 13; Oil Violet IRS; Solvent Blue 90; Solvent Violet 13; Violet 2; Violet No.   Links to Solvent Violet 13 Specification: Plastics and fiber application. Post time: May-25-2021

  PIGMENT ORANGE 13 – Introduction and Application     C.I. Pigment Orange 13 Structure No. 21110. Molecular formula: C32H24CL2N8O2. CAS number: [3520-72-7]   Structural formula     Color characterization Pigment Orange 13 is a bright yellowish orange pigment,the shade is slightly yellower than Pigment Orange 34 and the tinting strength is also slightly stronger.Moreover,the required concentration of pigment is only 0.12% when blending with 1% of titanium dioxide to achieve 1/3 SD in HDPE.   Table 4.106 Application properties of Pigment Orange 13 in PVC Project Pigment TiO2 Light fastness degree Migration  resistance degree PVC Full Shade 0.1% – 6 Reduction 0.1% 0.5% 4~5 2     Table 4.107  Application properties of Pigment Orange 13 in HDPE Project Pigment Titanium doxide Light fastness degree PE Full Shade 0.12% 5 1/3 SD 0.12% 1% 4     Table 4.108  Application of Pigment Orange 13 General Plastics Engineering plastics Fiber and Textile LL/LDPE ● PS/SAN X PP ○ HDPE ○ ABS X PET X PP ○ PC X PA6 X PVC(soft) ● PBT X PAN ● PVC(rigid) ● PA X Rubber ● POM X   ●-Recommended to use,   ○-Conditional use,   X-No recommended to use.   Varieties characteristics The color is similar to pigment orange 34, with a translucent specific surface area of 35~40m2/ G (specific surface area of Irgalite orange D is 39m2/ G).Heat resistant (200℃), can be used for color masterbatch, plastic (structure: synthetic (from several parts into a whole) resin, plasticizer, stabilizer, color material) (Polyvinyl chloride /PE/EVA/LDPE/HDPE/PP), plastic woven wire drawing, Rubber, etc.At the same time, because the color is bright, easy to disperse and the price is relatively moderate, it is widely used in the domain of water-based printing ink, solvent (properties: transparent and colorless liquid) ink, offset printing ink, water-based printing paste and fine art pigments. Method for the synthesis of

  PIGMENT YELLOW 147 – Introduction and Application     C.I. Pigment Yellow 147 Structure No. 60645. Molecular formula: C37H21N5O4. CAS number: [4118-16-5]   Structural formula Bright yellow powder, insoluble in water, with good light and heat resistance. Excellent acid and alkali resistance, good migration resistance. Pigment Yellow 147 is mainly used for the coloring of plastics, rubbers, resins, inks and coatings. It can also be used in electronic ray processing systems, optical disc engraving, medical and health supplies.   Table 5.43  Main properties of C.I. Pigment Yellow 147 Project PS ABS PC PET Pigment/% 0.05 0.1 0.05 0.02 Titanium dioxide/% 1.0 1.0 Light fastness degree 6-7 6 8 8 Thermal resistance/ 300 280 340 300 Weather resistance degree(3000h) 4 5   Table 5.44  Application range of C.I. Pigment Yellow 147 PS ○ PMMA ○ ABS ● SAN ○ PA6 ○ PC ● PVC-(U) ○ PA66 X PET ● POM ● PBT ● ●-Recommended to use,   ○-Conditional use,   X-No recommended to use.   Varieties characteristics Pigment Yellow 147 is excellent in thermal resistance,sublimation resistance, and light fastness. It is good compatibility with polyester, particularly suitable for the pre-coloring of spinning of polyester and polyether sulfone fibers, and can be used in automotive decorations fibers, clothes, interior textiles.   Preparation of C.I. Pigment Yellow 147 11.25 parts of 2-phenyl-4, 6-diamino-1,3, 5-triazine, 30.6 parts of 1-chloroanthraquinone and 15.9 parts of sodium carbonate were added to 200 parts of nitrobenzene, and 1.65 parts of ketone iodide was added to 9 parts of pyridine. The solution was stirred at 150-155℃ for 12h.The filtrate was filtered at 100℃ and washed with nitrobenzene at 100℃ until the filtrate showed only slight color, then washed with ethanol, and finally washed with hot water to remove free alkali. After drying, 34.7 parts of the product were obtained with a yield of 96.7%. Countertype：