SOLVENT BLUE 97-Introduction and Application     C.I. Solvent Blue 97 C.I.: 615290. Formula: C36H38N2O2. CAS No.: 61969-44-6 Reddish blue, melting point 200℃.   Main properties Shown in Table 5.20. Table 5.20  Main properties of C.I Solvent Blue 97 Project PS ABS PC Tinting strength (1/3 SD) Dye/% 0.23 0.46 0.126 Titanium dioxide /% 2 4 1 Thermal resistance degree Full shade 300 260~280 340 0.05% white reduction 300 260~280 340 Light fastness degree Full shade 7     0.05% 1/3 SD 6       Application range Shown in Table 5.21 Table 5.21  Application range of C.I. Solvent Blue 97 PS ● SB ● ABS ● SAN ● PMMA ● PC ● PVC-(U) ● PPO ● PET ● POM ◌ PA6/PA66 ● PBT ◌ PES fiber ◌         ●Recommended to use, ◌Conditional use.   Variety characteristics Solvent Blue 97 has high tinting strength, good light fastness, excellent thermal resistance, and can be used in the coloring of engineering plastics. It is applied to the pre-coloring of spinning of PET. The thermal resistance of Solvent Blue 97 is up to 300℃ in PA6 and 280℃ in PA66, which is suitable for pre-coloring of spinning of PA. Reddish blue, suitable for coloring of PET spinning, engineering plastics and also pre-coloring of PA, with thermal resistance up to 300℃ in PA6, and 280℃ in PA66.   Countertype     9,10-Anthracenedione, 1,4-bis((2,6-diethyl-4-methylphenyl)amino)- EINECS 251-178-3 1,4-Bis((2,6-diethyl-4-methylphenyl)amino)anthraquinone 1,4-bis[(2,6-diethyl-4-methylphenyl)amino]anthraquinone Solvent Blue 97 Transparent Blue RP Blue RR 1,4-bis[(2,6-diethyl-4-methylphenyl)amino]anthracene-9,10-dione Plast blue 5004       Links to Solvent Blue 97 Specification: Plastics and fiber application. Post time: Sep-06-2021

SOLVENT BLUE 122-Introduction and Application       C.I. Solvent Blue 122 C.I.: 60744. Formula: C22H16N2O4. CAS No.: 67905-17-3 Reddish blue, melting point 239℃.   Main properties Shown in Table 5.24. Table 5.24  Main properties of C.I Solvent Blue 122 Project PS ABS PC PEPT PA Tinting strength (1/3 SD) Dye/% 0.090 0.097 0.088 0.063 Not recommended Titanium dioxide/% 1.0 1.0 1.0 1.0 Light fastness degree 1/3 SD white reduction 6-7 5 7-8 7  1/25 SD transparent 7 6 8 8 Thermal resistance (1/3 SD) / (℃/5min) 300 300 300 290   Application range Shown in Table 5.25 Table 5.90  Application range of C.I. Solvent Blue 122 PS ● PMMA ● ABS ● SAN ● PPO ● PC ● PVC-(U) × PA6/PA66 × PET ●         PBT ● ●Recommended to use, × Not recommended to use.   Variety characteristics Solvent Blue 122 has high tinting strength, good light fastness, excellent thermal resistance, and can be used in the coloring of engineering plastics. It is particularly suitable for the pre-coloring of spinning of PET, and the fabric is excellent in light fastness, wet processing, and friction fastness. It is also suitable for the blow molding of polyester bottles. Reddish blue, excellent performance in tinting strength, light fastness, and thermal resistance. It can be used in PET spinning, engineering plastics and blow molding of PET bottles.   Countertype   Transparent Blue 2RA Blue R N-{4-[(4-hydroxy-9,10-dioxo-9,10-dihydroanthracen-1-yl)amino]phenyl}acetamide Plast blue 5005   Links to Solvent Blue 122 Specification: Plastics and fiber application. Post time: Sep-15-2021

SOLVENT YELLOW 163-Introduction and Application     C.I. Solvent Yellow 163 C.I.: 58840. Formula: C26H16O2S2. CAS No.: 13676-91-0 Positive reddish medium yellow, melting point 193℃.   Main properties Shown in Table 5.29. Table 5.29  Main properties of C.I Solvent Yellow 163 Project PS ABS PC PET Dye/ % 0.05 0.1 0.05 0.02 Titanium dioxide/ % 1.0 1.0     Light fastness degree 7 7 8 8 Thermal resistance/℃ 300 300 360 300 Weather resistance degree (3000h)     4~5 5   Application range Shown in Table 5.30 Table 5.30  Application range of C.I. Solvent Yellow 163 PS ● SB ● ABS ● SAN ● PMMA ● PC ● PVC-(U) ● PPO ● PET ● POM ● PA6/PA66 × PBT ● ●Recommended to use, × Not recommended to use.   Variety characteristics Solvent Yellow 163 has excellent light fastness, thermal resistance and weather resistance, and migration fastness. It can be used in the coloring of engineering plastics, especially in outdoor (automobile decoration). It is also suitable for the pre-coloring of spinning of PET. Reddish medium yellow. Excellent performance, could be used in coloring of engineering plastics (especially outdoor), and pre-precoloring of PET spinning.   Countertype   1,8-Bis(phenylthio)anthraquinone; Transparent Yellow 5RP; 9,10-Anthracenedione, 1,8-bis(phenylthio)-; 1,8-Bis(phenylthio)-9,10-anthracenedione; 1,8-Di(phenylthio)anthraquinone; Anthraquinone, 1,8-bis(phenylthio)-; EINECS 237-167-6; NSC 156516; Yellow GHS; 1,8-bis(phenylsulfanyl)anthracene-9,10-dione     Links to Solvent Yellow 163 Specification: Plastics and fiber application. Post time: Aug-26-2021

PIGMENT ORANGE 43-Introduction and Application C.I. Pigment Orange 43 Structure No. 71105. Molecular formula: C26H12N4O2. CAS number: [4424-06-07] Structural formula   Color characterization The chemical structure of Pigment Orange 43 is trans-form of pi ketone pigment, showing bright reddish orange. Pigment Orange 43 has good tinting strength, only need 0.9% pigment to prepare 1/3 SD of flexible PVC with 5% titanium dioxide,0.25% with 1% titanium dioxide.   Main properties as shown in Table 4.200~Table 4.202 and Figure 4.61.   Table 4.200    Application properties of Pigment Orange 43 in PVC Project Pigments Titanium dioxide Light resistance degree Weather resistance degree(5000h) Migration resistance degree     PVC Full Shade 0.1% – 8 4 4~5   Reduction 0.1% 0.5% 7~8         Table 4.201  Application properties of Pigment Orange 43 in HDPE Project Pigment Titanium dioxide Light fastness degree Weather resistance degree(3000h) HDPE Full shade 0.2%   8 5 1/3 SD 0.2% 1% 8     Table 4.202  Application range of Pigment Orange 43 General Plastics Engineering plastics Fiber and Textile LL/LDPE ● PS/SAN ● PP ● HDPE ● ABS ● PET X PP ● PC ● PA6 X PVC(soft) ● PBT ● PAN ● PVC(rigid) ● PA ○     Rubber ● POM X     ●-Recommended to use,  ○-Conditional use,  X -No recommend to use     Figure 4.61 Heat resistance of Pigment Orange 43 in HDPE (full shade)   Varieties characteristics Pigment Orange 43 has excellent light fastness which can be up to degree eight even diluted to a low concentration. It has good heat resistance when used for polyolefin, the heat-resistance is about 280 ℃ in PE and PET. However, the heat resistance significantly decreases when the concentration is below 0.1% in PE. It is also dissolve and its color change to yellow with low concentration in PET. Pigment Orange

PIGMENT YELLOW 81-Introduction and Application       C.I. PIGMENT YELLOW 81 Structure No. 21127. Molecular formula: C36H32CL4N6O6. CAS number: [22094-93-5] Structure formula   Color characterization Pigment Yellow 81 has a strong greenish shade,and the shade is more greenish after adding titanium dioxide.The tinting strength of pigment yellow 81 is low,the required concentration of pigment is 1.15% when blending with 5% of titanium dioxide to achieve 1/3 SD in flexible PVC,while the required concentration of pigment is only 0.27% when blending with 1% of titanium dioxide to achieve 1/3 SD in HDPE.   Main properties  Shown in Table 4. 99 ~ Table 4.101 Table 4. 99  Application properties of Pigment Yellow 81 in PVC Project Pigment Titanium dioxide Light fastness degree PVC Full Shade 0.1% – 7 Reduction 0.1% 0.5% 7 Table 4.100  Application properties of Pigment Yellow 81 in HDPE Project Pigment Titanium dioxide Light fastness degree PE Full Shade 0.27% – 7 1/3 SD 0.27% 1.0% 7 Table 4.101  Application range of Pigment Yellow 81 General Plastics Engineering plastics Fiber and Textile LL/LDPE ● PS/SAN X PP X HDPE ○ ABS X PET X PP ○ PC X PA6 X PVC(soft) ● PBT X PAN ○ PVC(rigid) ● PA X     Rubber ● POM X     ●-Recommended to use,   ○-Conditional use,   X-No recommended to use.                                   Varieties characteristics  Pigment Yellow 81 is inexpensive and limited to safety,use with caution!The blooming may be occur in the coloring of flexible PVC according to the formulation and processing conditions if the concentration of pigment is too low.In addition,there is no effect on the warpage of HDPE.   Countertype   PVYELLOWH108 Lithol Fast Yellow 0991K Benzidine Yellow 10G Plasco yellow 81 Einecs 244-776-0 C.I. Pigment yellow 81 Permanent

SOLVENT YELLOW 176-Introduction and Application       C.I. Solvent Yellow 176 C.I.: 47023. Formula: C18H10BrNO3. CAS No.: 10319-14-9 Reddish yellow, melting point 218℃. Good light fastness and thermal resistance, can be used in pre-coloring of PET.   Main properties Shown in Table 5.63. Table 5.63  Main properties of C.I Solvent Yellow 176 Project PS Project PS Tinting strength Dye/% 0.05 Light fastness degree 7 Titanium dioxide/% 1.0  Thermal resistance/(℃/5min) 280   Application range Shown in Table 5.64 Table 5.64  Application range of C.I. Solvent Yellow 176 PS ● PMMA ● ABS ● SAN ● PA6 × PC ● PVC-(U) ● PA66 × PET ● POM ●     PBT × ●Recommended to use,  × Not recommended to use.   Variety characteristics Solvent Yellow 176 has good light fastness and thermal resistance. It is suitable for the pre-coloring of PET. Compared with Solvent Yellow 114, it is slightly more reddish, but has more stable heat resistance performance and light fastness. It is recommended for polyester fiber. It also shows good acid and alkali resistance. Solvent Yellow 176 can be widely used in daily plastic, inks, fiber, etc. Our dyes have a certain molecular distribution when dissolved in plastic melt. In a certain proportion, it can be directly added to the plastic and evenly mixed to preplastic or molding, and the color concentration can be allocated according to the required amount. Use dye in through bright clean resin, can obtain bright transparent tone, if with appropriate titanium dioxide and dye combined use, can be obtained translucent or opaque tones. Dosage can be agreed according to needs, the general dosage of transparent tone is 0.02%-0.05%, the normal amount of opaque tone is about 0.1%.     Countertype   Solvent Yellow 176 parent Yellow 3GR Disperse Yellow 64 SAMAROMYELLOWH3GL Yellow FS 2-(4-Bromo-3-hydroxy-2-quinolinyl)-1,3-indandione 3′-Hydroxy-4′-bromoquinophthalone 4-Bromo-3-hydroxy-2-(1,3-indandion-2-yl)quinoline 4-Bromo-3-hydroxyquinophthalone C.I. 47023   Links to Solvent Yellow